LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module -MD0102

0 Review(s)

Rs 55

MD0102

New product

LM2596 DC to DC step down regulator

  • Ideal for battery operated projects requiring a regulated power supply.
  • Regulator Type: Step Down ( Non Isolated input to Output )
  • Input Voltage: +4 to 35v dc
  • Output Voltage: +1.23 to 30v dc
  • Output Current: 2A rated, ( 3A maximum with heatsink )

More details

No reward points for this product.


Specifications:-

  • Regulator Type: Step Down ( Non Isolated input to Output )
  • Input Voltage: +4 to 35v dc
  • Output Voltage: +1.23 to 30v dc
  • Output Current: 2A rated, ( 3A maximum with heatsink )
  • Efficiency: Up to 92% ( when output voltage is set high )
  • Switching Frequency: 150kHz
  • Dropout Voltage: 2vdc minimum
  • Protection: Short circuit current limiting
  • Load Regulation: +/- 0.5%
  • Voltage Regulation: +/- 2.5%
  • Temperature: -40 to +85 deg C ( output power less than 10Watts )
  • Board Size: 43.6mm L x 21mm W x 14mm H

This is high performance DC to DC Step Down Adjustable Power Supply Module. Based on Newly developed LM2596S Wide range Switching Regulator. Size: Approx. 43 x 20 x 14 mm Color: As the picture show Full load Temperature rise: 40 Load Regulation: ? 0.5% Voltage Regulation: ? 0.5% Dynamic Response speed: 5% 200uS Input voltage:4.50-40V Output voltage:1.50-35V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heat sink is required) Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficiency) Switching Frequency: 150KHz Rectifier: Non-Synchronous Rectification Module Properties: Non-isolated step-down module (buck) Short Circuit Protection: Current limiting, since the recovery Operating Temperature: Industrial grade (-40 to +85 ) (output power 10W or less) Package included: 1 x LM2596S DC-DC adjustable power step-down module

No customer reviews for the moment.

Write a review

LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module -MD0102

LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module -MD0102

LM2596 DC to DC step down regulator

  • Ideal for battery operated projects requiring a regulated power supply.
  • Regulator Type: Step Down ( Non Isolated input to Output )
  • Input Voltage: +4 to 35v dc
  • Output Voltage: +1.23 to 30v dc
  • Output Current: 2A rated, ( 3A maximum with heatsink )

30 products in category:

Compare