Warning: Last items in stock!
By buying this product you can collect up to 1 loyalty point. Your cart will total 1 loyalty point that can be converted into a voucher of Rs 1.
The name of this product itself is enough to explain its origin. Yes of course !!! this LCD module was used in old Nokia 5110/3310 cell phones. Now its been widely used by hobbyists for graphics, text etc.
Though it’s an industrial module, this LCD display is extremely easy to use. The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen.
This Nokia 5110 LCD Display Module is mounted on an easy to solder PCB. The Nokia 5110 LCD Module uses a Philips PCD8544 LCD driver, which is designed for mobile phones.
|Pin No:||Pin Name:||Description|
|1||Reset||This pin resets the module. It an active low pin (resets when 0V is provided)|
|2||Chip Enable (CE)||This pin is made low (0V) to select this particular display when more than one SPI peripherals are used.|
|3||Data/Command (DC)||This pin is used to switch between Data mode (high) and Command mode (low)|
|4||Serial Input (DIN)||This is the input pin (MOSI) through which serial instructions are sent|
|5||Clock (CLK)||All SPI modules require a common clock, this clock source is supplied to this pin|
|6||Power (Vcc)||This pin is used to power the display the supply voltage is from 5V to 7V|
|7||Back Light (BL)||Connects to the ground of the circuit.|
|8||Ground (GND)||Connects to the ground of the circuit.|
1 x Nokia 5110 LCD Module Red Backlight
No customer reviews for the moment.
14 products in category: