In stock
D2826-10 - 1800 KV (rpm/v) motor Weight - 50g Mounting Hole Bolt Circle: 16mm or 19mm Max Power - 250 watt Max Pull - 780g"
In stock
Dimension: 27.8*27mm Shaft diameter: 3.17mm Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3 Li-Poly Weight: 65g KV: 1000 Suitable for the propeller size: 1047,1060,9050
In stock
RPM: 1100kv Max current:18A No load current:1A Max power: 336W Internal resistance: 0.107 ohm Weight:70g (including connectors) Diameter of shaft:4mm Dimensions: 28x36m Prop size:7.4V/11x7 14.85V/7x3 Max thrust:1130g
In stock
Brand Name: DYS Item name: 2208 1400KV Brushless Motor KV: 1400KV Stator Diameter: 22mm Stator Length: 8mm Shaft Diameter: 3.17mm Motor Dimensions(Dia.*Len): 2826mm Weight: 44g No.of Cells(Lipo): 2-4S Max Continuous current(A): 26A Max Continuous Power: 384W Internal Resistance: 0.106
In stock
Dimension: 27.8*27mm Shaft diameter: 3.17mm Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3 Li-Poly Weight: 65g KV: 1800 Suitable for the propeller size: 1047,1060,9050
In stock
Running current: 30A(Output: Continuous 30A, Burst 40A up to 10 Secs.) Input Voltage: DC 6-16.8V (2-4S Lixx) Electronic Speed Controller is special for multi-Rotor design. DYS 30A 2-4S Brushless Speed Controller ESC Simonk Firmware. BEC: 5V 2 amp. Size: 46mm (L) * 26mm (W) * 11mm (H). Weight: 23g With SimonK updated firmware for multicopter
In stock
Input voltage: AC 110V-240V Balance charge current: 800mA Dimension: 90mm*55mm*35mm Display: Green and red LED Case: Plastic
In stock
Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. 8 model memory, digital control. Can be programmed by PC with included software.
In stock
Electronic Speed Controller (ESC) is a electronic circuit to vary the speed, direction and possible to act as a dynamic brake, of a brushless motor. This particular ESC is recommended with A2212 brushless motor (1000KV, 1400Kv, 2200KV).
In stock
Diameter: 9 inch Slope: 47 Inch (1143 Cm) Bore: approximately 3mm, 4mm, 7mm, 6mm or 78Mm motor shafts (come with the prop shaft washer, you can use for different shaft Recommended wheelbase: 550mm - 700mm Recommended motor: 800kv - 2200kv
In stock
Model Type: Fixed-Wing/Glider/Helicopter RF Range: 2.408-2.475GHz RF Power: < 20dBm RF Channel: 135 Bandwidth: 500KHz 2.4GHz System: AFHDS 2A / AFDHS Modulation Type: GFSK
In stock
Propeller diameter: 10' Pitch: 4.5' Material: Carbon Reinforced Excellent for multi-rotor copters
In stock
Diameter: 3.5mm Hook up RC Battery to Electronic Low resistence, and gives the best electric flowPackage Included: 3.5mm Gold Bullet Connector plug male x 1 pcs 3.5mm Gold Bullet Connector plug female x 1 pcs
In stock
Most stable KK Board ever. 6050 MPU system based. Easy graphical interfacing with receiver. In Built firmware. Easy to use for beginners. "
In stock
Includes 2 clockwise & 2 counter clockwise props. Genuine gefmfan props - not knock offs! ! High quality abs plastic - 5mm center hole. Fit most 250mm quads.